To get live view working: Make sure your camera is supported. Check Supported Cameras for compatibility. Under Settings, Display, set Time Before First and other Photos greater than 3 seconds. This gives enough time for live view to display. Under Settings, Shooting, Live View, Check the option for Enable Live View.
In Live View: The options are similar, but the mirror stays up as long as you are in Live View and are using Contrast Detection Autofocus or Manual Focus: Mode 1 begins with the first curtain open prior to the shot (so that the sensor is exposed to give a Live View image on the camera's LCD screen). When the shutter button is pressed the sensor
Hi there, Since the issue is till there, I would agree there is likely something happening with the shutter or mirror assembly that would need service.
Also, the canon 6d's bios battery is not accessible (damnit) - so a hard reset is not an option without disassembling the camera. For cameras with non-accessible backup battery Canon recommend that you remove the main battery, turn the camera on and hold the shutter button for 30 seconds. Not sur
Solution. (Face detection) Live Mode: With the same AF method as the Live mode, human faces are detected and focused. Have the target person face the camera. 1 Display the Live View image. Press the < > button. The Live View image will appear on the LCD monitor. When a face is detected, the < > frame will appear over the face to be focused.
. 86 248 97 460 239 40 306 399
canon 6d live view not working
